• Home
  • AboutUs
  • Products
  • Application
  • Download
  • ContactUs
  • Messages
Home|SiteMap|Contact Us|中文版
Nanjing Jartul Electronics Co., Ltd
  • Home
  • AboutUs
    • Company Intro
  • Products
    • 150~300W DC Elec. Load600~1500W DC Elec. Load1800~3000W DC Elec. Load4500W-6000W DC Elec. Load
  • Application
    • Electronic Load Brief Intro.JT63 Load's 9 highlights JT63 Load's 7 advantages Switch Power Supply Test JT63 Load Series Operation Charger TestBattery TestLED Power Supply Test
  • Download
    • Programmable DC Load
  • ContactUs
  • Messages

Application

Electronic Load Brief Intro.
JT63 Load's 9 highlights
JT63 Load's 7 advantages
Switch Power Supply Test
JT63 Load Series Operation
Charger Test
Battery Test
LED Power Supply Test
Electronic Load Brief Intro.

How to choose electronic loads?

From:    Author:    Publish time:2007-09-27 20:44    Clicks:175

1)Make sure that the rated input voltage/ current / power of the select models not only can satisfy the test requirements, but also is a slightly higher than the test requirements.

2)If the dynamic test is required to be made, please make sure that the current slew rate is programmable and confirm the resolution of the current slew rate. The controlled frequency of the JT63 series electronic load slew rate is 500Khz.

3)If  you have a higher requirements to the dynamic test, please confirm whether the maximum current slew rate meets the test requirements. For the same series electronic loads, the maximum current slew rate is proportional to the rated current and the full range current minimum rising time is fixed, so the shorter the full range current rising time is, the better the dynamic performance is. JT63 series electronic load full range current rising time is 10uS.

     Max. Current slew rate=Rated current/ Full range current rising time   

4)If the test environment is relatively bad, please choose the electronic load with a high loop bandwidth. In general, the shorter the full range current rising time (Min Rise Time) is, the higher the loop bandwidth is, the better the performance is in bad condition (the input rejection ration of the power supply is higher), the higher the reliability is.

5) If users have a higher requirement to the intelligent application and automatic test of the electronic load, please choose the electronic load with a high sampling frequency. The high sampling frequency can ensure the restoration of the input signal and the accuracy of the servo application, providing a solid condition for the expansion of the intelligent application. JT63 series electronic load, with 500kHz synchronous sampling, can measure peak to peak ripple/ RMS, transient overshoot Vp+, transient drop Vp-, the rising time and falling time of the power supply, etc.  

6) For production line application, the systmaticness and convenience of the automatic test should take the priority in consideration. The small angle LCD display screen is not preferable. JT63 series electronic load is with powerful automatic test and supports dynamic operation, OCP test, load effect, timing measurement, etc. Besides, high-luminance & full view graphic dot matrix screen of JT63 series electronic load is also very suitable for production line application.

[Comments:0/Comment] [Bookmark] [Big Medium Small] [Print] [Close]
MoreNews Comment
Quick Comment
标题:
姓名:
内容:
(必填)

Related Comment
Jartul Electronics Co., Ltd
Add: Jiangning, Nanjing, CN
Tel:86-25-37133189  Mobile:   86-13301588128    86-13813813329
Fax: 025-87133265
Email: jane@jartul.com
SiteMap|Contact Us|Messages|CmsAdmin
Copyright 2012-2024 © Nanjing Jartul Electronics Co., Ltd